What is the difference between a finished and unfinished floor?
Will moisture affect my hardwood flooring?
Is hardwood flooring okay in basements?
What moisture problems effect hardwood flooring?
What is the best way to clean hardwood flooring?
Should I use commercial-grade cleaners on my hardwood floors?
Is wax helpful in maintaining my hardwood flooring?
Where’s the best place to install hardwood flooring?
Which is better? Unfinished or pre-finished hardwood?
What is meant by “wood’s stability”?
What is the Janka hardness test?
Which specie is considered the benchmark for hardwood?
The main difference between these two kinds of hardwood floors is that finished floors have micro beveled edges, and can have up to 10 coats of finish. On the other hand, unfinished hardwood flooring has square edges, and is finished at the job-site.
Water should be avoided when cleaning hardwood flooring, especially if you plan on using an excessive amount. Moisture from water, especially in huge amounts, can be detrimental to hardwood flooring. This can lead to cracking or buckling.
Although hardwood flooring is an ideal material for your flooring needs, it is not recommended to be installed in sub floors or below floors. In these cases, laminated hardwood flooring or engineered hardwood flooring will do the trick.
When water gets trapped in the hardwood flooring and the sub floor, this can lead to crowning, warping, or cupping. If you see this happening, you should let it dry completely to avoid the occurrence of crowning.
The easiest and most common cleaning tip for hardwood flooring is to sweep, vacuum and use a dry mop when cleaning your hardwood floors. Mopping your floor with a lot of water is not advisable because this can lead to seepage and water moisture buildup.
Yes, you can. However, you must keep in mind that for pre-finished hardwood flooring you should check with the manufacturer’s recommended care instructions.
Contrary to popular belief, wax should never be used, especially if your flooring already has a surface type finish.
Thanks to its versatility, hardwood flooring can be installed anywhere in your house provided that the room you are installing it into is above ground. Since hardwood flooring is very sensitive to water and moisture, installing it in bathrooms, kitchen and sauna baths are not recommended.
Both choices have their advantages. If you are planning on matching new hardwood flooring with an existing room, then it is recommended to use unfinished hardwood. On the other hand, the use of pre-finished hardwood will provide both shorter installation time, and ease of installation.
The stability of hardwood flooring is determined by its ability to withstand moisture, water and heat.
The Janka hardness test is a scale that measures the hardness of hardwood. The higher the rating, the harder the wood. Examples of hardwood with their corresponding Janka hardness number are: Brazilian cherry – 2350, Mesquite – 2345, Santos Mahogany – 2200, Merbau – 1925, and Jarrah – 1910.
Red oak is the benchmark for hardwood, at least in terms of the Janka hardness test. This species has a rating of 1290, and is often compared to other species of hardwood in terms of hardness.